What is a CAT5 cable?
CAT 5 cable is a low density cable type specifically intended for the distribution of real-time multimedia content. CAT 5 cable contains four pairs of twisted cables and has a high signal integrity that no other cable can match. The twists are designed to reduce electromagnetic interference (EMI).
What kind of CAT5 cables are there?
Over time CAT5 technology developed and as it did different versions of it came out: CAT 5e cable is an enhanced version of Cat 5. CAT 6 cable provides performance of up to 250 MHz, which is more than double category 5 and 5e. CAT 7 cable is for transmission at frequencies up to 600 MHz.
If one is referring to the cables generically they can do so by CAT5-6-7
For more technical differences between the cables, see the table below.
Why CAT5-6-7cable? CAT5 cable is ideal for installations that require high bandwidth and high resolution without relying on any existing network infrastructure. CAT5 cable is a more cost effective solution than Fiber optic cable. CAT5 technology supports high quality real-time multi-media transfer through inexpensive, low density, twisted pair cabling.
Why use CAT5 distribution in the digital signage world? CAT5 cable requires no special software and is entirely hardware-based and network independent which is a major advantage. CAT5 technology facilitates the broadcast of media content from a single player to hundreds of screens and its ease of installation makes it a very attractive option.
Comparison Between the CAT5 Cables
CAT 5
CAT 5e
CAT 6
CAT 7
Frequency
1-100 MHz
1-100 MHz
1-250 MHz
1-600 MHz
Attenuation
24 dB
24 dB
21.7 dB
20.8 dB
Impedance
100 Ohm ± 15%
100 Ohm ± 15%
100 Ohm ± 15%
100 Ohm ± 15%
NEXT
27.1 dB
30.1 dB
39.9 dB
62.1 dB
Power Sum-NEXT
n/a
27.1 dB
37.1 dB
59.1 dB
ELFEXT
17 dB
17.4 dB
23.2 dB
n/a
Power Sum-ELFEXT
14.4 dB
14.4 dB
20.2 dB
n/a
Return loses
8 dB
10 dB
12 dB
14,1 dB
Skew delay
50 ns
50 ns
50 ns
20 ns
What kind of CAT5-6-7 cable should I be using?
Cables that are optimized for Video Extension
- High Bandwidth support - Low Attenuation - Minimal capacity - Low Skew - Low Crosstalk
But testing is always recommended
What are UTP / FTP / STP CAT5 cables?
UTP - Unshielded Twisted Pair. These are unshielded twisted pairs in an unscreened sheath and are the most widespread cables throughout the world as well as the cheapest. Being unshielded gives it a higher degree of flexibility. Due to its low cost, UTP cabling is used extensively for local-area networks (LANs) and telephone connections. UTP cabling does not offer as high bandwidth or as good protection from interference as coaxial or fiber optic cables, but it is less expensive and easier to work with.
FTP - Foiled Twisted Pair. These are twisted pairs in a screened sheath. It is a thin, flexible cable which costs less per foot than any other type of LAN cable.
S/FTP or S-STP - Screened Shielded Twisted Pair. A shielded twisted pair of cables in a screened sheath. Both cables are individually shielded and there is also an outer metal shielding covering the entire group of shielded copper pairs. This type of cabling offers the best protection from interference from external sources. This cable is optimized for Video Extension.